MICROSPERSION® 530E
An anionic emulsion of oxidized high density polyethylene to improve surface properties
FEATURES AND BENEFITS
- Formulated for FDA 21CFR compliance (175.105, 175.300, 176.170, 176.180)
- Improves scratch resistance
- Adds rub resistance and surface slip properties
COMPOSITION
Polyethylene emulsion
RECOMMENDED ADDITION LEVELS
3.0 - 10.0%
SYSTEMS AND APPLICATIONS
Water based coatings and inks. Industrial coatings (including plastic, metal and leather); wood coatings; printing inks and OPV's (including flexo and gravure); interior and exterior can and container coatings; coil coatings.
TYPICAL PROPERTIES
| Request Sample Download TDS Download SDS | |
| Appearance | Translucent Liquid |
| Density at 25 °C (g/cc) | 1 |
| Emulsifier Type | Anionic |
| Natural or Naturally Derived | No |
| pH | 9.0 - 10.5 |
| Total Solids | 35% |
| Viscosity at 25 °C (cP) | <100 |
| Wax Solids | 35% |
| Wax Type | Polyethylene |
|
This is a made to order item with minimum order quantities.
| |
FEATURED PERFORMANCE PROPERTIES
| Compare | |
| Key: Effective Very Effective Extremely Effective |